Owning a well pump system has fantastic advantages, including lower monthly water bills and fresh, easy-to-access water. It’s even better when combined with a sprinkler system. But with this comes the risk that technology fails. From problematic pressure tanks to faulty switches and pumps, there are many reasons why it might be time to call in the experts for a well pump repair or installation and sprinkler repair or sprinkler installation.
Key Warning Signs that You Need a Well Pump Repair
First up, let’s take a look at some obvious signs that something is not right with your well pump.
- Pathetic, poor water pressure
- Dirty water
- Loud, or ‘unhealthy’ noises
- Air bubbles ‘spitting’ from your faucets
- Unusually high electric bills
- No water from your faucets
- A constantly running well pump
Key Warning Signs that You Need Sprinkler Repair
- Damaged Sprinkler Heads
- Clogged Sprinkler Heads
- Leaks, caused by lawnmowers or other tools.
- Broken Valves
- Loss of pressure
- Uneven watering
- Dead grass, or puddles
- Unusually electric or water bills
Common Causes of Well Pump Failure
Whether or not you want to call in a trusted professional, we’re going to take a look at the possible problems that might be causing your well pump’s failure. While a faulty water pump itself might be the cause, there are various other parts of your water well’s system that could be the culprit. Let’s take a look:
Loss of Power
If the power goes out, your tank won’t have been refilled because electricity is needed to run the pressure trigger switch within the tank. If you haven’t experienced a power outage, then the breaker for the pump has probably blown; or there’s some damaged wiring. Open up your electric box and check if the breaker has been tripped. If it has, push it back to the “on” position. If it’s not the breaker, then turn your breaker to “off” to protect it from further damage and call your local well pump repair and installation company.
Low Water Table
If you’ve been through a drought or a dry few weeks, then there may simply be a low amount of water in your well. The obvious sign of a low water table is when the faucets ‘spit’ water, or the water looks muddy or tastes odd. You’ll either need to wait for some rain or consider putting your pump deeper underground to access a lower water level. If this is the case, contact your local well pump repair and installation company.
Small Pump Size
Your water pump needs to be the optimum size for your home’s water usage. Your plumping set-up will determine the size of the pump. For example, it needs to be bigger if there are many faucets and appliances on the property that use water. If this is the problem, contact your local well pump repair and installation team.
A Tired Water Pump
Your pressure tank needs to be the right size for your home’s water usage too; otherwise your pump will continuously be working. If that is the case, then your pump maybe tired and overworked. The parts that make up the pump may be worn out and need replacing. Call your local well pump repair and installation service for advice.
Water Sediment Causing Wear
The sediment found in your water supply may be causing severe wear to the water pump, by slowly eroding the bearings and other parts. If the water contains dirt, hard water minerals or tiny stones, it can cause damage overtime. Sadly, this is a downside of a home water pump. Thankfully, your local well pump repair and installation company will have a solution and can fix the problem.
When is it Time for a New Well Pump Installation?
As listed above, there are many reasons why it may be time for a new well pump. Although certain parts can be replaced and cleaned, sometimes the years of use call for a new pump. Whether it’s because your pump is too small for your water usage, or because the wear is irreversible, often the only fix is a new well pump installation.
What to Do if Your Well Pump Isn’t Working?
So, you believe you’ve found the cause. But now what? Your best option is to call in your local well pump repair installation company. They’ll carry out some simple checks to identify if you need a minor repair or a full reinstallation. Although you can carry out some checks alone, it is a complicated procedure that may also be dangerous. The best well pump and installation companies can:
- Provide onsite troubleshooting
- Safely remove the pump, if needed
- Completely disassemble and inspect all components, without damage
- Thoroughly clean all the water pump’s parts and components
- Repair and replace damaged or worn parts
- Suggest solutions such as new parts, or coatings
- Motor diagnostics and repair
- A new installation if needed.
What to Do if Your Sprinkler System Isn’t Working:
Problems with your sprinkler system are just as painful. If you want to avoid wasting time and money through a DIY job, then call your local sprinkler repair team and they’ll do an extensive check of your sprinkler system, including:
- Identify damaged sprinkler heads
- Remove damaged parts
- Install new sprinkler parts
- Flush the water line
- Test the new sprinkler heads
- Check your pump, pipes and pressure and repair any faulty parts.
The Benefits of a Well Pump Installation:
New to well pumps? There is a wide range of reasons why many homeowners invest in well pump installations.
No Water Bills to Pay
When you’ve got your own water supply, water bills are minimal. Your well pump will bring fresh water from the well to your home. That’s it. Outside of water testing, maintenance and the occasional repair job, you’ll be saving thousands of dollars with your own personal water in the near future.
Cleaner Water Supply
One of the main reasons most people invest in a well pump installation is that the benefits from their own, clean water. City water is controlled by the EPA, meaning many solutions and chemicals are included to meet the regulations. With your own well pump, you’ll have fresh-tasting water (not metallic or chlorine tasting) and be in control of how your water purification system affects what you drink. It’s cleaner and healthier.
You Can Still Use Your Water in The Same Way
No, you don’t have to carry your water in buckets. Modern well pump installations connect directly to your plumbing system, so you’ll be able to use your water just like anyone else in the country does – except it’s yours and in your control. You can clean your car, fill up the pool, shower and drink just like usual.
The Benefits of Sprinkler Installation
- Have a stunning, healthy lawn.
- Save time and money.
- Reduce water bills.
- No more dirty pathing and gardens.
- Perfectly balanced watering, with timers.
Well Pump Repair and Installation Near Me
Want to control where your water comes from, what’s in it and save money? Then call your local well pump repair and installation company. They’ll be able to fix or install any well pump system, for any household without hassle.
Sprinkler Repair and Installation Near Me
Is your sprinkler system acting up? Is the pressure low, pipes leaking or is it failing to water your garden evenly? If so contact your local sprinkler repair and sprinkler installation company and they’ll fix it for you at an affordable price.